Brodit support/chargeur Honeywell EDA10A cigar.

Prix 184,95 €

Pas en stock

Livraison rapide
Produits de haute qualité
Paiements sécurisé

Détails

Plus d'infos

Compatibility

Instruction

Détails

Use an active holder for your EDA10A and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12/24 Volt socket. 3A charging. Charging via pogo plug.

This holder is to be used when you want to have your EDA10A extra securely in place and still have it easy accessable.

The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden.

Plus d'infos

Plus d'infos
Marque d'accessoire	Brodit
Barcode	7320287124002
Prix Public TTC	184,95 €
Appareil avec ou sans étui	nee
Caractéristique du support	Toestelspecifiek
Cable / Qi / charger type / connnector	Molex, sig plug, piggy tail (Easy Switching)
Charger l'appareil via	Pogo / Pins
Tension	12V et 24V compatible
Voltage (output)	5V
Max Amperage	3,0 Amp
Montage standaard	AMPS, VESA
Verrouillable	oui sans serrure
Color	zwart
Info produit	Support professionnel avec rotule pour votre smartphone, système de navigation ou tablet. Plus de réflexions ennuyeuses par la possibilité de modifier l’inclinaison.
Item Returns	This item can be returned

Voir plus + Montrer moins -

Compatibility

Voir plus + Montrer moins -

Instruction

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.

2. To place the device in the holder: Press the spring stud locking upward. Place the lower part of the device in the holder, then flip/press the upper part forwards so it snaps into place in the holder. Press the spring stud locking downward.

3. To remove the device from the holder: Press the spring stud locking upward. Press upwards on the upper part of the holder, in the same time pull the upper part of the device out from the holder and then lift the device up and out from the holder.