Brodit support Zebra TC53/TC58 keylock/pogo/cig.plug 3A

Prix 179,99 €

En stock

Livraison rapide
Produits de haute qualité
Paiements sécurisé

Détails

Plus d'infos

Compatibility

Instruction

Détails

Holder with key-lock

Active holder with cig-plug and tilt swivel. With Easy-switching system. Charging via pogo pins. Fits for device with original boot with/without handstrap. 3A charging. 12/24V. 2 keys included.

This holder is the perfect choice when you want to secure your device and still have it easy accessable, while getting the battery charged. Customed with a perfect fit for device with original boot, with or without handstrap. The holder has an extra robust design for an extra secure fit, and is equipped with a lock. In order to remove the device from the holder you need a key (two keys are included). Easy one-hand insertion and removal. You have full access to the camera and all buttons and outlets when the device is in the holder.

With power supply, charging via pogo pin connection. With cig-plug cable that connects to the vehicle's 12/24 Volt socket. 3A charger.

Easy-switching system:

The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time when upgrading to a new device, or for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.

The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade ABS/Acetal plastic. Color: black. Made in Sweden. Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc.

Plus d'infos

Plus d'infos
Marque d'accessoire	Brodit
Barcode	7320287353068
Prix Public TTC	179,99 €
Appareil avec ou sans étui	ja
Caractéristique du support	Toestelspecifiek
Options du support	handstrap add on
Cable / Qi / charger type / connnector	Molex, sig plug, piggy tail (Easy Switching)
Charger l'appareil via	Pogo / Pins
Tension	12V et 24V compatible
Voltage (output)	4.6 - 5.3V
Max Amperage	3,0 Amp
Montage standaard	AMPS
Verrouillable	oui avec serrure
Color	zwart
Info produit	Support professionnel avec rotule pour votre smartphone, système de navigation ou tablet. Plus de réflexions ennuyeuses par la possibilité de modifier l’inclinaison.
Item Returns	This item can be returned

Voir plus + Montrer moins -

Compatibility

Voir plus + Montrer moins -

Instruction

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw so the holder is firmly in place, but still can be adjusted.

2. To place the device in the holder: Place the device over the holder and slide it straight downward into the holder. Slide the lock block donwward into place on top of the holder. Press the button to lock.

3. To remove the device from the holder: Use the enclosed key to open the lock. Pull the lock block straight up in order to set the device free. Lift the device straight upward, out from the holder.